Elementor #3879
Placing an Assembly Order with Cyber City Circuits
We offer an assortment of services, including:
-
Firmware -
QC Testing -
Packaging
-
PCBA -
DFM Consulting -
Circuit Board Design
How to place an Assembly
-
Fill out the form that needs to be downloaded via the link. -
Prepare your gerber package. -
Prepare pictures or renders of your board. Front and back. -
Prepare a high-level explanation of firmware or QC procedures to be ran. -
Add all notes, questions, comments that you may have to the email. -
Send your email VIA Sales@CyberCityCircuits.com.
Upload your form
*Attachments not bigger than 2MB
Important things to know
01
We require 10% overage on PCBs.
02
We require 10% overage on all parts and 20% overage on all parts 0402 and smaller.
03
If we perform your assembly, we will need a position file. Here is how to do it in KiCAD.
04
Clients can earn bonus points by clearly marking the BOM line number on each kitted part they send. To make it even easier, we recommend marking the parts with the format “Job Number + BOM Line Number”. Additionally, if you are ordering new parts for this order, you can use the same number as your customer number.
05
By submitting a Request for Quote you are agreeing to our Terms of Service.
Shipping address
Cyber City Circuits
Attn: D. Ray
336 Georgia Ave
Suite 106 Box 233
N Augusta, SC 29841
Assembly Tiers
- Low Quantities – No Minimums
- Materials MUST be kitted.
- No firmware or QC services.
- Stencil may be flex or framed.
- 3-Day, 5-Day, and 10-Day turnaround options available.
- Quantities up to 500 PCB Assemblies.
- Part sourcing services available.
- Panelization Requirements
- Firmware and QC Services available.
- Framed stencil required.
- Quantities greater than 500 PCB Assemblies
- Part sourcing services available.
- Panelization Requirements
- Firmware and QC Services available.
- Framed stencil required.
- Blanket Ordering / Scheduled Ordering available.
Panelization Requirements
During the manufacturing process PCB Assemblers will use edge rails through out the process to feed the boards through the various machines. Our machines work best when we can use mounting pins to hold your boards in place. Vendors like JLCPCB and PCBWay will panelize your boards with edge rails for you. If you don’t want to or your design can’t be panelized, there are other ways we can assemble your board and we can still help.
For more information, check out Much Ado About Panelization and Mounting Holes.
They
trust us
4.9
Based on 41 reviews
FAQs
01 What does ‘Materials MUST be kitted’ mean?
We do not offer general parts sourcing for orders less than 500 units any longer. We are expecting the client to provide parts and overage.
Please ship parts to the following address:
Cyber City Circuits
Attn: D. Ray
336 Georgia Ave
Suite 106 Box 233
N Augusta, SC 29841
03 Do you offer parts sourcing at all?
We do source parts for orders of 500 units or more, but generally orders do not include parts sourcing. For orders less than 500 units, parts are expected to be provided by the client. We can source PCBs and stencils. If you have questions or need help, please ask. We don’t mind helping.
04What type of stencil do you accept?
or very short prototyping runs, we can use a flex or framed stencil, but for all production quantities we require a framed stencil. We can help you with any questions about sizing or material.
There are many places to source a framed stencil. We recommend OshStencil, JLCPCB, and PCBWAY for your stencil needs.
05What can I do to make my assembly process as easy as possible?
here are a few things that you can do that can save a lot of time, money, and stress throughout the process.
- When ordering your parts, use ‘Job Number’ + ‘BOM Line Number’ as your customer number.
- If you have already ordered the parts, writing the line number on the bag with a sharpie makes the check in process a lot quicker. This isn’t required, but it is helpful and appreciated.
- Make sure you include enough overage parts for your assembly.
- Be confident with your design before you go into production.
- We offer prototyping services as well, if you want to make a handful of assemblies before going into production.
06How do I generate a Pick and Place file?
This is a good question. We wrote a blog article, explaining how to do this in KICAD, called KICAD Tip: Generate a Position File. If you have any further questions, please feel free to contact us.
07How do I generate a Pick and Place file?
I’m glad you ask, this is a great way to manage all of these panelization requirements.
JLCPCB has a few requirements in order to panelize your board:
- it will need to have a non-irregular shape.
- the shorter side must be longer than 70mm.
Let’s go through what the different options on JLCPCB’s quote form are for panelization.
- Delivery Mode – There are three options here. ‘Single PCB’ is the default option and the one you’re likely most familiar with. ‘Panel by Customer’ is an option for you to select if you have panelized the boards yourself, before submitting your gerbers for production. ‘Panel by JLCPCB’ is the option we’re interested in here.
- Panel Format – You can have your boards panelized 5 rows of 4 boards, 1 row of 3 boards, and so on. When considering how many boards to put on your panel, things like board thickness, the size of the individual boards, and if any components will overlap from one board to another during assembly. Generally we like to keep our panel sizes to less than 150mm x 150mm, but we can process boards larger than that. It seems to be the most economic size for panelization.
- Edge Rails – Here we have three main options. When panelizing, we have found that 5mm edge rails on all four sides are great for processing and assembly.
09I can’t panelize my board, what can I do?
Good question. In that case, we could complete assembly with just mounting holes placed near the corners. For more information on this, please read our blog post Much Ado About Panelization and Mounting Holes.
09I can’t panelize my board, what can I do?
Good question. In that case, we could complete assembly with just mounting holes placed near the corners. For more information on this, please read our blog post Much Ado About Panelization and Mounting Holes.
Additional Notes can be found on JLCPCB’s Website.
Discover our Blog
01
Maximizing Efficiency in PCB Assembly: Tips and Tricks
02
These Are a Few of My Favorite Type-Cs
03